 |
 |
The
cooling coil incorporated in all the closed circuit
towers is Evapco’s Thermal-pak® with unique
advanced features which provides the maximum heat transfer
characteristics at lowest pressure drop. All these products
are available in heavy galvanised (725 gm/m²) casing
or AISI 304 or AISI 316 stainless Steel.
Series
ATW represents decades of engineering excellence and
is specifically designed for ease of access for maintenance,
high durability, optimum efficiency and low power consumption.
The ATW is an induced draught unit available with special
low noise fans and water noise absorbers for sensitive
sites.
Series LSWA is a traditional fan forced draught closed
circuit cooling tower, with inherently low noise centrifugal
fans but can be fitted with additional attenuation if
the application is hyper sensitive. This range of towers
is ideally suited for indoor installation and applications
which require extensive air inlet and outlet ductwork.
Series LRW is a variation on the LSWA and selected for
applications which demand a low silhouette when placed
behind a building parapet wall or screening.
Series PMWA is a forced draught axial fan version of
the LSWA and was introduced to achieve low fan power
it is ideally suited for industrial applications which
require a single air entry.
Series ESW is a state of the art in closed circuit cooling
towers incorporating the most advanced technology available.
The features combine all the maintenance advantages
of the ATW range with induced draught fans and excellent
access features but also incorporated additional direct
contact heat transfer surface which steps up the efficiency
to levels never achieved before.
|
